10757 - 182 Street
Edmonton, Alberta
T5S 1J5
Canada
Tel: 780-484-2231
Fax: 780-484-0817

SICMA tillers meet the requirements for robustness and reliability, a result of the passion and know-how acquired over 50 years of successes.They are characterized by high adaptability to every type of terrain (hard, dry and stony, soft, wet and sandy) and every kind of machining thereby allowing adjustment for each type of tractor. 

Model SA 

Fixed, very light from 15 up to 30 HP, 1 speed

  • 4 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • 1-speed gearbox made by SICMA with conical roller bearings
  • Side chain drive in oil bath with automatic chain tensioner and sight glass
  • Adjustable side skids to determine the desired working depth.
  • Parking stand
  • Cat 1, 3 point hitch
  • PTO shaft size 4 (Eurocardan) with Shear Pin protection
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH OFFSET BLADES WEIGHT
SA 105 10-15 HP 41" 4-8" 13" 24 210 lbs
SA 125 15-20 HP 49" 4-8" 17" 28 265 lbs

 

Model ZLL 

Fixed, light from 20 up to 35 HP, 1 speed 

  • 6 "L" blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • 1-speed gearbox made by SICMA with conical roller bearings
  • Side chain drive in oil bath with automatic chain tensioner and sight glass
  • Lower 3rd point hitches with adjustable width, will offset to the right
  • Adjustable side skids to determine the desired working depth
  • Parking stand
  • Cat I, 3 point hitch
  • PTO shaft size 4 (Eurocardan) with Slip Clutch protection
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH OFFSET BLADES WEIGHT
ZLL 100 16-25 HP 39" 4-8" 8" 30 290 lbs
ZLL 120 20-35 HP 47" 4-8" 8" 36 335 lbs
ZLL 150 25-40 HP 59" 4-8" 8" 42 420 lbs

 

Model CS

Fixed, medium from 30 up to 50 HP, 1 speed

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • 1-speed gearbox made by SICMA with conical roller bearings and oil level indicator
  • Side chain drive in oil bath with automatic chain tensioner and sight glass
  • Lower 3rd point hitches with adjustable width, will offset to the right side
  • Adjustable side skids to determine the desired working depth
  • Parking stand
  • Cat I, 3 point hitch
  • PTO shaft size 5 (Eurocardan) with Slip Clutch protection
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH OFFSET BLADES WEIGHT
CA 165 30-40 HP 65" 4-8" 8" 48 586 lbs
CS 185 40-50 HP 73" 4-8" 8" 54 640 lbs

 

Model SHF

Automatic Hydraulic Offset, medium-heavy from 35 up to 60 HP, 1 speed

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end hoes turned inwards)
  • 1-speed gearbox made by SICMA with conical roller bearings and oil level indicator
  • Side gear drive in oil bath with automatic chain tensioner and sight glass
  • Hydraulic shifting on chromed bars automatically driven by the sensor
  • Sensor for automatic side shifting around trees, posts and vines
  • Complete hydraulic self-contained system
  • Tractor adjustable lever for direct control of shifting (e.g. to avoid younger plant damage)
  • Adjustable front skids to control the desired working depth
  • Cat I and II, III point hitch
  • PTO shaft size 6 (Eurocardan) with Slip Clutch protection
  • Box frame
  • PTO shaft size 6 (Eurocardan)with slip clutch protection
  • “Long life” HD seal provided inside the rotor bearings
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH OFFSET BLADES WEIGHT
SHF 160 35-60 HP 63" 4-8" 14" 36 992 lbs
SHF 185 40-60 HP 78" 4-8" 16" 42 1080 lbs

 

Model RD

Fixed, medium-heavy from 35 up to 65 HP, 4 speeds

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • 4-speed gearbox made by SICMA with conical roller bearings, and oil level indicator
  • Side gear drive in oil bath with sight glass
  • Lower 3rd point hitch adjustable will offset to the right side
  • Adjustable side skids to control the desired working depth
  • Parking stand
  • Cat 1and 2, 3 point hitch
  • PTO shaft size 6 (Eurocardan) with Slip Clutch protection
  • Polyester powder coating system
  • Box frame
  • “Long life” HD seal provided inside the rotor
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH BLADES WEIGHT
RD 185 45-55 HP 73" 4-8" 42 900 lbs
RD 210 50-60 HP 82 4-8" 48 1009 lbs

Model RM

Fixed, heavy from 40 up to 80 HP, 1 or 4 speeds

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • Single or 4-speed gearbox made by SICMA with conical roller bearings, and oil level indicator
  • Side gear drive in oil bath with sight glass
  • Lower 3rd point hitches with adjustable width
  • Adjustable side skids to control the desired working depth
  • Parking stand
  • Cat 1 and 2, 3 point hitch
  • PTO shaft size 6 (Eurocardan) with Slip Clutch protection
  • Polyester powder coating system
  • Box frame
  • “Long life”HD seal provided inside the rotor’s bearings
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH OFFSET BLADES WEIGHT
RM 210C(4 speed) 40-70 HP 82" 4-8" 9" 48 1124 lbs
RM 235(1 speed) 40-70 HP 92" 4-8" 9" 54 1212 lbs
RM 235C(4 speed) 40-70 92" 4-8" 9" 54 1235 lbs

Model SPR

Fixed, very heavy from 70 up to 90 HP, 4 speeds+2 speeds

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned outwards)
  • 4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator
  • Side gear drive in oil bath with sight glass
  • Lower 3rd point hitches with swinging movement
  • Adjustable side skids to control the desired working depth
  • Parking stand
  • Cat 2, 3 point hitch
  • PTO shaft size 8 (Eurocardan) with Slip Clutch protection
  • Box frame
  • “Long life” HD seal provided inside the rotor’s bearings
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH BLADES WEIGHT
SPR 185 55-70 HP 71" 4-8" 42 1252 lbs
SPR 210 66-90 HP 81" 4-8" 48 1350 lbs
SPR 235 75-105 HP 91" 4-8" 54 1426 lbs
SPR 260 85-120 HP 100" 4-8" 60 1490 lbs

 

Model RG

Fixed, Heavy Duty from 90 up to 130 HP, 2+2 speeds

  • 6 curved blades per flange mounted in spiral line (for normal soils)
  • Standard rotor (with end blades turned inwards)
  • 2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator
  • Side gear drive in oil bath with sight glass
  • Lower 3rd point hitches with swinging movement
  • Adjustable side skids to control the desired working depth
  • Parking stand
  • Cat II and III, 3 point hitch
  • Box frame
  • PTO shaft size 8 (Eurocardan) with slip clutch
  • “Long life” HD seal provided inside the rotor’s bearings
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH BLADES WEIGHT
RG 255 90-130 HP 100" 4-8" 60 2140 lbs
RG 305 90-130 HP 120" 4-8" 72 2375 lbs

Model RG-SR-CR

Heavy duty from 90 up to 130 HP, spike rotor, leveling bar and cage roller

  • Designed for land reclamation, and rough areas
  • Spike rotor for smooth non vibration with spike teeth mounted in a spiral
  • 2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator
  • Side gear drive in oil bath with sight glass
  • Lower 3rd point hitches with swinging movement
  • Adjustable cage roller to control the desired working depth
  • Parking stand
  • Cat II and III, 3 point hitch
  • Box frame
  • PTO shaft size 8 (Eurocardan) with slip clutch
  • “Long life” HD seal provided inside the rotor bearings
  • Polyester powder coating system
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH SPIKES WEIGHT
RG 230-SR-CR 90-130 HP 90" 10" 43 3100 lbs
RG 255-SR-CR 100-130 HP 109" 10" 48 3410 lbs
RG 305-SR-CR 110-130 HP 119" 10" 58 3890 lbs

 

Model RX

Extra Heavy Duty from 150 up to 325 HP, 1 speed, 1000rpm PTO

  • Cat III and Cat IV lift arms with swinging movement
  • 6 curved blades per flange
  • Standard rotor with end blades turned outward
  • PTO shaft size 13 (Eurocardan) with cam limiting slip clutch
  • "Long life" sealing provided inside the rotor bearing
  • Box frame
  • Adaptor kit for hitch Cat III and IV, quick hitch compatible
  • Adjustable side skids to control the working depth
  • Parking stand
  • 1 speed gearbox 1000rpm
  • Cast iron side cover and double pair of reduction gears in synthetic oil bath
  • Powder coating, ensuring durable color and gloss
MODEL POWER REQUIRED WORKING WIDTH WORKING DEPTH BLADES WEIGHT
RX 275 150-250 HP 107" 4-10" 60 3637 lbs
RX 310 175-275 HP 122" 4-10" 72 4145 lbs
RX 360 200-300 HP 142" 4-10" 84 4760 lbs
RX 410 200-325 HP 161" 4-10" 96 4850 lbs

 

Version 5.3
Site Map | Login | Powered By: Techweavers Inc.