10757 - 182 Street
Edmonton, Alberta
T5S 1J5
Canada
Tel: 780-484-2231
Fax: 780-484-0817

   Maschio-Gaspardo follows with maximum intrest the world of mulchers,putting maximum effort in design and to complete the machines range. Side mulchers offer a great versatility to the customers: the machine can work both in the back as a normal mulcher and in the side position, beyond the profile. Maschio offset mulchers are versatile, safe and user friendly: with the same machine is possible to make very different operation like cutting the grass back to the tractor, pruning a tree hedge or keeping a river bank.

   Maschio Giraffina side mulcher can chop behind the tractor or on the side, in vertical position (+90°) or on slopes (-65°). Designed for small tractors (20-35 HP).

   Features: Cat I, 3pt. hitch / gearbox P.T.O. 540 rpm with free-wheel / front PVC protections / hydraulic system for side or inclined offset / transmisson belts external adjustement / electronic balanced rotor / pair of skids / self cleaning adjustable rear levelling roller / bracket for drive cover protection / shockproof protection system / 90º breather pipe / shredder head floating system.

MODEL POWER REQUIRED WORKING WIDTH HAMMERS WEIGHT
Giraffina 140 20-35 HP 54" 28 586 lbs

   Maschio Giraffetta side shredder designed for low power tractors (25-45 HP) or models with reduced track (150 cm). It can be utilized to cut grass and shred residues of small diameter.

   Features: Cat I, 3pt. hitch / gearbox P.T.O. 540 rpm with free-wheel incorporated / front safety flaps / outer chain adjustment / hydraulic system for side or inclined offset / self cleaning adjustable rear leveling roller / hood opens for maintanence / shock proof protection system / shredder head floating systempair of skids / lower counter-blade / 90º vent pipe / safety release / inside gearbox.

MODEL OFFSET WORKING WIDTH POWER NEEDED HAMMERS WEIGHT
Giraffetta 160 53" 63" 25-45 HP 22 900 lbs

 

   Maschio Giraffa is the best seller model, appreciated for it's strength, reliability and working quality. Machine suitable for professional use with medium power tractors (60 to 80 HP). Ideal for road sides cleaning, it can also be used for shredding brushwood.

   Features: Cat II and III, 3pt. hitch / gearbox P.T.O. 540 rpm with free-wheel incorporated / front safety flaps / outside gearbox / CV joint / hydraulic system for side or inclined offset / outer chain adjustment / nitched lower counter blade / welded upper counter blade / double system work, double position roller / shock proof protection system / hood opens / pair of skids / 90º vent pipe / safety release.

MODEL OFFSET POWER REQUIRED WORKING WIDTH HAMMERS WEIGHT
Giraffa 185 65" 60-80 HP 75" 20 1467 lbs
Giraffa 210 70" 70-80 HP 84" 22 1556 lbs

   Maschio Giraffona heavy duty model is a very professional machine ideal for heavy duty and continious work. The strong rotor and the special shredding chamber make this model ideal for shredding pruning residues and bushes typical of uncultivated banks.

   Features: Cat II and III, 3pt. hitch / gearbox P.T.O. 540 rpm with free-wheel incorporated / front safety flaps / outside gearbox / outer chain adjustment / side offset and hydraulic inclination / self cleaning adjustable rear levelling roller / shock proof protection system / constant velocity PTO shaft / shredder head floating system / pair of skids / lower counter blade / 90º vant pipe / hood opens / safety release.

MODEL OFFSET POWER REQUIRED WORKING WIDTH HAMMERS WEIGHT
Giraffona 260 82" 140-180 HP 102" 20 2635 lbs

 

   Maschio Fiore sickle bar mower has two-motion tooth-blade system that makes scissor cut which leads to a high speed operation on any crop. The two-blade motion guarantees a sharp and clean cut on any type of grass, be it damp or flattened. It is clean, thanks to the total absence of soil which this mowing system does not raise, and sharp because the stems are not frayed. It is equipped with a double connecting-rod and adjustable coupling for tractors with a minimum of 25 HP and 540 r.p.m. P.T.O. The mower is operated by connecting a driveline to the tractors P.T.O. This transmits drive to two distinct rod-crank mechanisms that operate the blade and blade teeth, by means of a pulley and belt transmission system housed in a dedicated casing. The mechanisms at the end of the cutting bar allow the machine to be used effectively in the thickest forage crops without clogging.

   Features: Cat I & II, 3pt. hitch / rear mount / cabin-controlled hydraulic lift / grass swath guide / double action cutting head / safety breakaway 540 PTO shaft / cutting angle range 90º up & 45º down / 8 to 10 km/h operating speed.

MODEL WORKING WIDTH POWER REQUIRED WEIGHT
Fiore 175 69" 25-70 HP 512 lbs
Fiore 205 81" 25-70 HP 529 lbs
Fiore 235 93" 25-70 HP 547 lbs

   The Sicma flail mowers are characterised by high adaptability to any type of terrain and to every kind of machining: the mulching of grass, bushes, wood and pruning waste. The wide range of SICMA flails ensures the possibility to treat, in addition to grass, any other type of cultivation residues (pruning, stalks, runners…).

   Sicma SLE model flail mower : Cat I, 3pt. hitch / 540 rpm PTO / centre or offset mount / duck-foot blades / working height adjustable by the roller / 4.5" rotor diameter / 14.5" swing diameter / 5.5" rear roller diameter / 1.25" to 3.5" height adjustable / powder paint.

MODEL WORKING WIDTH POWER REQUIRED BLADES WEIGHT
SLE 160 63" 35-45 HP 30 617 lbs
SLE 190 75" 40-50 HP 36 660 lbs

 

   Sicma TE model flail mower : Cat I & II, 3pt. hitch / 540 rpm PTO with free wheel clutch / heavy duty PTO shaft / centre mount & offset brackets / parking stand / working height adjustable / rear roller / smooth hammers / hydraulic cylinder / polyester powder coating / front protections against accidental ejection of objects.

MODEL WORKING WIDTH POWER REQUIRED BLADES WEIGHT
TE 160 63" 30-50 HP 20 604 lbs
TE 180 72" 40-55 HP 22 661 lbs
TE 200 79" 45-60 HP 26 772 lbs
TE 220 87" 50-65 HP 28

827 lbs

 

   Sicma TZF model flail mower : Cat I & II, 3pt. hitch / double PTO to work front & back at 540 and 1000 rpm / smoothed hammers / gearbox with conical roller bearings and integrated free wheel / shiftable working configuration with screw / counter-knives system inside the shredding chamber / support of the rear roller with shielded bearings, also protected from outside agents / front protections against accidental ejection of objects / polyester powder coating system.

MODEL WORKING WIDTH POWER REQUIRED BLADES WEIGHT
TZF 200 79" 60-90 HP 16 1764 lbs

   Sicma TR model flail mower : Cat II, 3pt. hitch / gearbox with conical roller bearings and integrated free wheel / transmission with V-belts and tensioner screw system / smoothed hammers / cantre or offset mount / front protections against accidental ejection of objects / support of the rear roller with shielded bearings / counter-knives system inside the shredding chamber / electronically balanced driveshaft / oscillating lower hitch / polyester powder coating system / rear roller or swiveling rubber wheels kit (optional).

MODEL WORKING WIDTH POWER REQUIRED BLADES WEIGHT
TR 200 80" 60-70 HP 22 1517 lbs

Swiveling rubber wheels kit replacing roller (optional)


   The SITREX DM model disk mowers range, including 4 - 5 - 6 - 7 - discs machines, fits the requirements of small and large farms. The DM4 Disc mower, with 4 discs and 1.67m / 65" 3/4 working width is especially suitable for small farms. The DM5 Disc mower, with 5 discs and 2.05 m / 80" 3/4 working width has the peculiarity of two inner discs which turn to the same direction. This allows to obtain a narrower windrow which avoids the tractor running over the mowed grass.This mower fits the requirements of a medium-sized farm. The DM6 Disc mower, with 6 discs and 2.40m / 94" 1/2 working width is suitable for medium-sized and large farms. The DM7 Disc mower, with 7 discs and 2.80 m /110" 1/4 is especially suitable for large farms. High quality pinions, bearings, discs and knives, guarantee the best reliability even under heavy working conditions.

   Features: mowing arm adjusts to the angle of the ground / arm avoids obstacles / oval-shaped disks / curved blades /  hydraulic lift / 540 rpm PTO.

MODEL WORKING WIDTH POWER REQUIRED DISKS BLADES WEIGHT
DM 4 5'-6" 35+ HP 4 8 991 lbs
DM 6S 7'-11" 50+ HP 6 12 1476 lbs
DM 7 9'-1" 60+ HP 7 14 1551 lbs
DM 8 10'-3" 65+ HP 8 16 1630 lbs

Version 5.3
Site Map | Login | Powered By: Techweavers Inc.